Fiscal receipts on the clinic's fiscal device
This guide explains how to print the fiscal receipt (касов бон) of a cash or card payment recorded in DentaFlow on the clinic’s fiscal device, how a reversal (storno) receipt is printed, and how to check the day on the cash desk screen. Admin and Front Desk print and enter receipts; the Admin sets up the device list and the tax groups. Everything described here is visible only when the Fiscal device („Касов апарат“) module is on for the clinic. Every label below gives the Bulgarian original in parentheses.
At a glance
- Under every Cash („В брой“) or Card („Карта“) payment — on an ambulatory sheet, an invoice or an instalment — you can see whether it has a fiscal receipt. On a computer linked to the fiscal device, Print fiscal receipt („Печат на касов бон“) prints it on the device.
- After a payment that has a receipt is reversed, the reversal receipt is printed with Print reversal receipt („Печат на сторно бон“).
- A payment by bank transfer or with the method Other („Друго“) has no fiscal receipt line. A receipt is recorded only for a payment in euro.
- You need the Fiscal device module, a Windows computer with DentaFlow Bridge 1.7.0 or newer, and a fiscal device connected to that computer.
- No receipt prints until a tax group is set. DentaFlow does not choose or recommend a group — the clinic’s accountant says which one.
- DentaFlow does not print a receipt twice: if the device does not confirm, the app asks what is on the paper.
- Which payments need a fiscal receipt is for the clinic’s accountant to decide. This article describes what the app does and is not tax advice.
What you need
- The Fiscal device module. A separate paid module — 10 € a month, VAT included. A clinic on a modular subscription adds it in Settings → Subscription („Абонамент“) and then turns it on in Settings → Modules („Модули“), the Fiscal device („Касов апарат“) card. For other clinics the DentaFlow team turns it on.
- A Windows computer with DentaFlow Bridge 1.7.0 or newer. Printing goes through DentaFlow Bridge — the same app the doctor signs with KEP through (see KEP signing & DentaFlow Bridge). DentaFlow Bridge updates itself; printing works once version 1.7.0 is installed on the computer with the fiscal device. With an older version you see “DentaFlow Bridge on this computer is old and does not print fiscal receipts. Update it to 1.7.0 or newer.”
- A fiscal device connected to that computer. DentaFlow Bridge contains drivers for the protocols of Datecs, Tremol, Eltrade, Daisy and Incotex. So far printing has been tried on one model only — an Eltrade A3, a non-fiscalised (test) device. We do not claim the other brands and models work before they have been tried.
Without a linked computer the module is still useful: the number of a receipt printed on the device by hand can be entered against the payment from any computer — see A receipt number entered by hand.
Setup
Open Settings → Integrations → Fiscal device (Настройки → Интеграции → „Касов апарат“). The card has three parts: the clinic’s list of devices, Fiscal device on this computer („Касов апарат на този компютър“) and Tax group for the fiscal receipt („Данъчна група за касовия бон“).
Linking the computer to the fiscal device
Do this on the computer the device is plugged into, with DentaFlow Bridge running.
- Under Fiscal device on this computer, check the Operator code („Код на оператора“) field — four characters, part of the УНП on every receipt; usually 0001.
- Click Find the fiscal device („Търси касовия апарат“). The search takes up to 30 seconds. If nothing is found you see “No fiscal device was found on this computer. Check the cable and that the device is on.”
- A device that is found is shown with its manufacturer, model, individual number and whether it is fiscalised. If it is already on the clinic’s list, click Use on this computer („Използвай на този компютър“). If it is not, an Admin adds and links it in one step with Add and use („Добави и използвай“); other roles see that the device is not on the list yet.
- Click Test the connection („Провери връзката“). On success you see the model, the number of the last document and the device’s time. This check prints nothing.
The link is kept in the browser on that computer: each front-desk computer is linked on its own. Unlink from this computer („Откачи от този компютър“) removes it.
An Admin can also add a device by hand with Add device („Добави устройство“): Name („Име“), Individual number of the device („Индивидуален номер на устройството“; two Latin letters and six digits), Fiscal memory number (optional) („Номер на фискалната памет (по избор)“) and Model (optional) („Модел (по избор)“). A device is never deleted — it is switched off with The device is in use („Устройството се използва“) and is then not offered when a receipt is entered.
Tax group
A fiscal device has eight tax groups, А to З. DentaFlow sets no default group and does not suggest which one is right — take it from the clinic’s accountant.
- For the clinic: under Tax group for the fiscal receipt, the Admin picks the Default group for the clinic („Група по подразбиране за клиниката“) and saves it. While it says Not set („Не е зададена“), no receipt prints.
- For a single service: in the service edit window, the Tax group for the fiscal receipt („Данъчна група за касовия бон“) field. A service without its own group uses the default. See Services & price list.
The receipt of a payment on an ambulatory sheet has one line for each paid service, with that service’s group. The receipt of a payment on an invoice or an instalment has one line with the clinic’s default group. If a group is missing, printing stops with the message “No tax group is set (Settings → Integrations → Fiscal device).”
Printing a fiscal receipt
Under every cash or card payment there is a line for the fiscal receipt. Until there is a receipt it shows No fiscal receipt („Без касов бон“).
- On the computer linked to the device, click Print fiscal receipt („Печат на касов бон“) under the payment. The amount, the payment method and the receipt lines come from the recorded payment.
- When the device confirms, you see “Fiscal receipt No. {number} is printed.” and the line shows Fiscal receipt No. {number} · {date and time} („Касов бон № {номер} · {дата и час}“) — the number and the time from the device itself.
If something does not go smoothly, the line says what happened:
- Fiscal receipt: printing failed („Касов бон: печатът не успя“) — nothing was printed. Click Print fiscal receipt again.
- Fiscal receipt: requested, not printed („Касов бон: заявен, не е отпечатан“) — the request went to the device but its answer was not stored (the page was closed, DentaFlow Bridge stopped). Click Check the print („Провери печата“): DentaFlow asks DentaFlow Bridge what became of the same request, and the receipt is not printed a second time. If the request never arrived, the print is marked as failed and can be repeated.
- Was the receipt printed? („Отпечатан ли е бонът?“) — the device did not answer, but the number of its last document changed. Look at the paper. If a receipt for that amount came out, check Receipt number („Номер на бона“), Receipt date („Дата на бона“) and Receipt time („Час на бона“) and click Yes, it is printed („Да, отпечатан е“). If there is no such receipt, click No, there is no such receipt („Не, няма такъв бон“) — the request is dropped and the receipt can be printed again.
A print that was started is finished from the computer linked to the same device. Demo mode does not print fiscal receipts.
Printing when the payment is saved
The payment windows for an ambulatory sheet, an invoice and an instalment have a checkbox, Print the fiscal receipt on save („Печат на касов бон при запис“). With it ticked the receipt goes to the device as soon as the payment is saved, with no second button.
- The checkbox shows only on a computer linked to the fiscal device, to Admin and Front Desk, and only when the method is Cash („В брой“) or Card („Карта“), in euro.
- It is off until you tick it. The choice is kept in the browser on that computer.
- The payment is saved in every case. If the receipt does not print, the same window says why, and the receipt is finished from the line under the payment, as described above.
A receipt number entered by hand
From a computer that is not linked to a device, or for a receipt you printed on the device itself, click Enter receipt number („Въведи номер на бона“) under the payment. In the Fiscal receipt number („Номер на касовия бон“) window fill in Receipt number („Номер на бона“), Receipt date („Дата на бона“) and Receipt time („Час на бона“), pick the Fiscal device („Касов апарат“) if the clinic has devices on its list, and click Save number („Запиши номера“). The app does not print such a receipt; it is marked entered by hand („въведен ръчно“).
Reversal (storno) receipt
A reversal receipt is issued after the payment has been reversed in DentaFlow and it has a fiscal receipt.
- Reverse the payment: Reverse („Сторно“) on its row, reason Entered by mistake („Грешно въведено“) or Money refunded („Възстановена сума“), then Reverse („Сторнирай“). Invoice and instalment payments are reversed from the invoice.
- No reversal receipt („Без сторно бон“) appears under the payment. On the linked computer, click Print reversal receipt („Печат на сторно бон“). The reversal receipt carries the reason from the payment’s reversal and the details of the original receipt.
- After printing, the line shows Reversal receipt No. {number} · {date and time} („Сторно бон № {номер} · {дата и час}“).
From a computer with no link to the device, use Enter reversal receipt number („Въведи номер на сторно бона“). A payment reversed before it had a fiscal receipt needs no reversal receipt.
A reversal receipt for a card payment has not been confirmed on a device yet. If the device refuses it, issue it on the device itself and enter the number by hand.
Cash desk for the day
Cash desk for the day („Каса за деня“) opens from the Billing („Фактуриране“) page (the Cash desk for the day button) or from the Fiscal device card in Settings → Integrations. Admin and Front Desk can see it.
- Pick a day; today is the default. It shows the cash and card payments of the day — on ambulatory sheets, invoices and instalments — with their fiscal receipts.
- For each payment method there is a total for the day, Taken (payments: {count}) („Приети (плащания: {брой})“) and Reversed during the day (payments: {count}) („Сторнирани през деня (плащания: {брой})“). The large amount is what was taken minus what was reversed on the day.
- To finish ({count}) („За довършване ({брой})“) is on top: payments with no fiscal receipt, with a requested or failed print, and reversed payments with no reversal receipt. The receipt is printed or entered straight from the row. When there are none, you see “Every payment of the day has a receipt on record.”
- For today, on a computer linked to the device, there are also X report („X отчет“), Z report („Z отчет“), Cash in („Служебно въведени“) and Cash out („Служебно изведени“), with Amount in euro („Сума в евро“). The Z report closes the day on the fiscal device and resets its daily totals, so it asks for confirmation. Reports and cash in/out are not stored in DentaFlow — the paper and the device’s memory are the record.
The totals on the cash desk screen come from DentaFlow records, not from the device’s memory. Check them against the daily report of the device.
Limits
- Windows only. DentaFlow Bridge runs on Windows; from a computer with another operating system the receipt is entered by hand.
- The computer the device is plugged into does the printing. Each computer is linked on its own; from the others the receipt is entered by hand.
- One model has been tried — an Eltrade A3, non-fiscalised.
- Reversal of a card payment has not been confirmed yet.
- Euro only. A fiscal receipt is recorded only for a payment in euro.
- Cash and card only. Bank transfer and Other have no fiscal receipt in DentaFlow.
Frequently asked questions
Which payments need a fiscal receipt? The clinic’s accountant decides. DentaFlow offers a receipt for payments recorded as Cash or Card and gives no tax advice.
Which tax group should we choose? The one the clinic’s accountant names. DentaFlow does not choose or recommend a group; until one is set, no receipt prints.
Can a receipt be printed twice? DentaFlow Bridge does not print the same request a second time. When the device’s answer is missing, the app checks the request (Check the print) or asks you what is on the paper instead of printing again.
Why can’t I see the Print fiscal receipt button? The button is shown to Admin and Front Desk on a computer linked to a fiscal device. On a computer with no link you only see Enter receipt number. Also check that the Fiscal device module is on and that the payment is cash or card.
What does “DentaFlow Bridge does not answer on this computer. Start it and try again.” mean? DentaFlow Bridge is not running or not installed on that computer. Once it is running, click the button again.
Does it work with my fiscal device? DentaFlow Bridge has drivers for the protocols of Datecs, Tremol, Eltrade, Daisy and Incotex, but printing has been tried only on an Eltrade A3. Click Find the fiscal device and Test the connection to see whether your device is detected, and write to us about the model before you rely on printing.
Do the totals on the cash desk screen match the device’s report? They come from DentaFlow records. If a receipt was issued on the device with no payment in DentaFlow, or the other way round, the two will differ — so check them against the daily report of the device.