Supplier catalogues & price comparison
The Catalogues & Marketplace (Каталози и пазар) tab in Inventory holds the price lists of the suppliers your clinic works with. From them DentaFlow works out the price per stock unit, shows which of your suppliers is cheapest for an item, and prepares orders in whole packs. Catalogues, prices and material consumption are visible only inside your clinic (with the pooled-demand module, only an anonymous number of packs is shared — see Pooled demand). The page is available to Admin only. Every label below gives the Bulgarian original in parentheses.
At a glance
- Import a price list with Import price list (Внеси ценова листа) — a CSV, XLSX or XLS file up to 10 MB, in four steps: File (Файл), Columns (Колони), Linking (Свързване), Done (Готово).
- With the AI price list import (PDF) (AI импорт на ценови листи (PDF)) module, part of the AI pack, you can also upload a PDF price list up to 8 MB: AI reads the rows and you check every price before importing — see PDF price list.
- Prices are read the way a Bulgarian price list writes them — “1.234,50”, “1 234,50”, “35,00 €” — and saved in euro. A price list in leva is converted to euro on import at the fixed rate 1 € = 1.95583 BGN.
- Rows without a price (or with another error) aren’t imported — DentaFlow lists them with the row number and the reason.
- A catalogue price is for a whole pack. Units per pack (Брой в опаковка) turns the pack price into a price per stock unit.
- Quantity price tiers (per pack) (Ценови прагове при количество (за опаковка)) on a catalogue item record from how many packs a lower price applies — see Quantity price tiers.
- Compare prices (Сравни цени) on an item ranks your suppliers’ offers by price per unit and marks the Best price (Най-добра цена).
- The supplier can change the prices and availability of its own items through the link to an open order — see Prices changed by the supplier.
- One-click reorder (Бърза поръчка) in Inventory uses the catalogue: it picks the cheapest supplier and orders whole packs.
- The Material consumption (Разход на материали) panel shows what was actually written off from stock in the last 90 days. With no write-offs, the panel isn’t shown.
- With the Pooled demand for supplies (Обединено търсене на консумативи) module, the panel also shows the pooled quantity of other clinics for the same item and which supplier tier it reaches. DentaFlow does not order or negotiate prices for you.
The Catalogues & Marketplace tab
The table lists each catalogue item with the columns Catalogue product (Продукт в каталог) (with its SKU), Supplier (Доставчик), Package size (Разфасовка), Price (Цена) and Linked stock item (Свързан складов артикул). The price is shown per pack (”/ pack”), with the VAT and, if the supplier changed it, a note about the change. Search with the Search product or SKU… (Търсене по артикул или SKU…) box and filter by supplier with All suppliers (Всички доставчици).
You can also add a catalogue item by hand with New item (Нов артикул): Supplier (Доставчик), SKU (Артикулен номер (SKU)), Product name (Наименование), Category (Категория), Package size (Разфасовка), Pack price (Цена за опаковка) (in euro), Units per pack (Брой в опаковка), VAT (ДДС), Lead time (days) (Срок за доставка (дни)), Link to inventory item (Свържи със складов артикул) and Notes (Бележки). If you turn off Available from supplier (Наличен при доставчика), the item isn’t offered in one-click reorder or the price comparison.
Importing a price list
- On the Catalogues & Marketplace (Каталози и пазар) tab, click Import price list (Внеси ценова листа).
- File (Файл) — choose the Supplier (Доставчик) and upload the file: CSV, XLSX or XLS up to 10 MB or, if the PDF module is on, a PDF price list up to 8 MB (see PDF price list). From an Excel file the first sheet is read; DentaFlow finds the header row by itself within the first 15 rows, even if there are supplier details above it.
- Columns (Колони) — map the file’s columns to the DentaFlow fields: SKU / Item code (Артикулен номер (SKU)), Product name (Наименование на продукта), Category (Категория), Package size (Разфасовка / Опаковка), Units per pack (number) (Брой в опаковка (число)), Pack price (Цена за опаковка), VAT rate (%) (Ставка ДДС (%)), Currency (Валута) and Notes (Бележки). Most are recognised automatically. Name and price are required. Leave a column you don’t need on Do not map (Не свързвай). Below the table, the Currency of the prices in the file (Валута на цените във файла) block lets you pick Euro (EUR) (Евро (EUR)) or Leva (BGN) (Лева (BGN)) — see Price list currency.
- Linking (Свързване) — for each row DentaFlow suggests a stock item from your inventory (Auto-matched (Автоматично разпознат)). Check the suggestions and change or remove a link where needed. The first 30 rows are shown.
- Click Import into catalogue (Внеси в каталога). The Done (Готово) step shows how many items were imported.
PDF price list
You can import a PDF price list once an admin has switched on the AI price list import (PDF) (AI импорт на ценови листи (PDF)) module in Settings (Настройки) → Modules (Модули). The module is part of the AI pack and is off by default — then only CSV and Excel are accepted.
- On the File (Файл) step, upload the PDF (up to 8 MB). Above the drop zone you see “PDF price lists are read by AI” (PDF ценовите листи се разчитат от AI): the PDF is sent to Anthropic (US) only to read its rows. CSV and Excel files stay in your browser.
- While AI reads the list you see “AI is reading the price list… A long list takes up to a minute.” AI reads the code, product, pack, price and VAT.
- On the Columns (Колони) step the columns are already mapped (“These rows were read from the PDF by AI”). AI can miss a row or misread a figure — check every price against the PDF before importing.
- From there the import is the same as for CSV and Excel: Linking (Свързване), Import into catalogue (Внеси в каталога).
If the module is off, a PDF gives “PDF price lists are read by AI, and AI import is off for this clinic. An admin can turn it on in Settings → Modules.” Split a list that is too long (“The list is too long to read in one go…”) into smaller PDFs and import them one by one. If the file can’t be read, use CSV or Excel.
How numbers are read
Prices are read the way a Bulgarian price list writes them:
- “1.234,50” and “1 234,50” — a dot or a space for thousands, a comma for the decimals;
- “35,00 €” — the sign or text around the number is ignored;
- “1234.50” and “1,234.50” — English notation;
- “12,5” — a single comma is always the decimal separator.
A cell that doesn’t hold exactly one number — empty, “по запитване” (on request) or “12,50 / 15,00” — isn’t taken as a price: the row is skipped, never imported as free. If the VAT column is missing or empty, 20% is used. If the units-per-pack column is empty, 1 is used.
Prices are saved in euro. A price list in leva is converted — see the next section.
Price list currency
On the Columns (Колони) step DentaFlow suggests a currency in the Currency of the prices in the file (Валута на цените във файла) block and shows where it found it: the price column header, a Currency (Валута) column, the “лв.”, “BGN” or ”€” signs in the values, or a title line above the table. If the file states no currency, you see “The file does not state a currency. Since 1 January 2026 prices are taken as euro — choose “Leva” if the list is in leva.” Check the choice before you continue.
- If you choose Leva (BGN) (Лева (BGN)), prices are converted to euro at the fixed rate 1 € = 1.95583 BGN and rounded to the cent. You see how many rows are in leva, and under each converted price “from {amount} BGN”.
- A row that carries its own currency sign (for example “35,00 лв.” or ”€ 17,90”) keeps it; your choice applies to the rest. If the file has both, you see “The file has prices in both leva and euro…”.
- After importing you see “Prices converted from leva to euro: {count} (at the fixed rate 1 € = 1.95583 BGN).”.
Skipped rows
Rows aren’t imported when:
- the name is missing;
- the price is missing or invalid;
- the units per pack or the VAT rate are invalid;
- the SKU repeats within the file (the first row is imported, the later ones are skipped).
Before importing, the Linking (Свързване) step shows “{count} of {total} rows will not be imported (the reason is shown under each row).” ({брой} от {общо} реда няма да бъдат внесени (причината е под всеки ред).) After importing, the Skipped rows: {count} (Пропуснати редове: {брой}) list shows each skipped row with its number in the file and the reason — for example “Row 14 (Articaine 4%): price missing” (Ред 14 (Артикаин 4%): липсва цена). Fix those rows in the file and import it again.
Importing again
When you import a new price list from the same supplier, rows with the same SKU are updated, not duplicated. If the file has no SKU column, DentaFlow numbers the rows by their position in the file (SKU-1, SKU-2…) — so for regular price updates it’s safest for the file to have item codes.
Package size and price per unit
A catalogue price is for the whole pack — what the supplier sells (a box of 100 gloves, a pack of 50 cartridges). Stock on hand and purchase-order lines are in the stock item’s unit (one glove, one cartridge).
- Units per pack (Брой в опаковка) says how many units of the linked stock item one pack holds. For a box of 100 gloves, enter 100.
- When the catalogue item is linked and a pack holds more than one unit, the table shows the price for one stock unit under the pack price — for example, a box of 100 gloves at €5.40 comes to €0.054 per glove. The VAT rate is shown separately.
- Orders are placed in whole packs: if 30 gloves are needed, one box — 100 gloves — is ordered. The line total is packs × pack price.
- A catalogue item without a link shows Unlinked (Не е свързан). To order or compare it, open it and choose Link to inventory item (Свържи със складов артикул).
Quantity price tiers
Many suppliers give a lower price from a certain number of packs up. Open the catalogue item and, under Quantity price tiers (per pack) (Ценови прагове при количество (за опаковка)), click Add tier (Добави праг): enter the Minimum quantity (packs) (Минимално количество (опаковки)) and the Price per pack (Цена за опаковка) for each tier. Empty means the item has no tiers. Tiers are whole numbers from 1 up, with distinct quantities and a price from 0 up — at most 10 per item.
The supplier can add or change its tiers itself through the link to an open order — see Prices changed by the supplier.
The tiers show in the Supplier tier (Праг на доставчика) column of the Material consumption panel when pooled demand is on — see Pooled demand.
Price comparison
- On the Items (Артикули) tab, click the Compare prices (Сравни цени) icon on the item’s row.
- The Cross-supplier price comparison (Сравнение на цени между доставчици) window lists every offer from your catalogues that’s linked to this item, ranked by price per stock unit — not by pack price. The cheapest is marked Best price (Най-добра цена).
- For each offer you see the supplier, the product and SKU, the package size and units per pack, the price per unit, the pack price and VAT. You also see the supplier’s delivery terms — lead time (“Delivery within {n} days”), “Free delivery over {amount}” and the delivery fee — as the supplier itself stated them through the link to a sent order. Whatever it didn’t state reads “not stated” (“Delivery terms: not stated”); nothing is assumed. Each offer also has a rough order estimate, “Order: {n} pk = {amount}”, with the delivery and the “Total” when the fee is known; without a stated fee you see “Total without delivery” and “The supplier has not stated a delivery fee, so it is not included.” When the prices differ, the bottom line says how much you save per unit compared with the highest offer.
- Order (Поръчай) next to an offer opens a new purchase order to that supplier, for the quantity that brings stock back up to twice the reorder level, rounded up to whole packs. Check it and click Save changes (Запази промените) — the order is saved as a Draft (Чернова).
If the item has no linked catalogue offers, you see “No supplier offerings for this item yet.” (Няма въведени каталожни оферти за този артикул.) — import your suppliers’ price lists on the Catalogues & Marketplace (Каталози и пазар) tab.
Prices changed by the supplier
While an order to the supplier is open (Sent (Изпратена) or Partial (Частично)), the supplier can use the link to that order to change the Pack price (Цена за опаковка) and the Available (Наличен) flag of its own items in your catalogue. With Add quantity price tiers (Добави ценови прагове при количество) the supplier can also enter its quantity price tiers. The new price applies to your next orders at once; orders already sent keep their prices.
- In the catalogue table, under the price, you see “Price changed by the supplier on {date} · previous price {price}” or, if only availability changed, “Updated by the supplier on {date}”.
- The note stays until you change the item’s price or availability yourself or import a new price list — then it clears.
- If the supplier changes an item while you have it open for editing, saving shows “This item changed meanwhile (e.g. by the supplier). The latest data is loaded — open it and save again.”
How the supplier answers an order and keeps its price list is described in Inventory → Supplier confirmation.
Ordering from the catalogue
- Order (Поръчай) on a row of the catalogue table opens a new purchase order for one pack from that supplier. The order note records the product, the SKU and the number of packs. If the catalogue item isn’t linked to a stock item, you see “Link this catalogue item to a stock item to order it.” (Свържете каталожния артикул със складов артикул, за да го поръчате.) and its editor opens.
- One-click reorder (Бърза поръчка) on the Items (Артикули) tab uses the catalogue too — for each low-stock item it picks the supplier with the lowest price per unit and makes one order per supplier. See Inventory → One-click reorder.
Orders are saved as a Draft (Чернова) — you send them to the supplier from the Purchase orders (Поръчки) tab, as described in Inventory.
Material consumption
Below the catalogue, the Material consumption (Разход на материали) panel shows what was actually written off from your clinic’s stock in the last 90 days — manual write-offs and procedure materials. When a procedure is edited and its materials go back into stock, the returned quantity is subtracted.
| Column | What it shows |
|---|---|
| Used (90 days) (Изписано (90 дни)) | Total quantity written off over 90 days |
| Average per month (Средно на месец) | The 90-day total divided by three months |
| Need for 3 months (Нужда за 3 месеца) | The monthly average × 3 |
| Annual spend (projection) (Годишен разход (прогноза)) | The monthly average × 12 × the item’s current Cost / unit (Цена / бр.) |
Up to 10 items are shown — highest projected annual spend first. The figures come from your clinic’s data only. If nothing was written off in the last 90 days, the panel isn’t shown.
Pooled demand
With the Pooled demand for supplies (Обединено търсене на консумативи) module, the panel also shows how many other DentaFlow clinics use the same item and which of your supplier’s price tiers the pooled quantity reaches. An admin switches the module on in Settings (Настройки) → Modules (Модули); it is off by default and available to clinics with an active subscription. While it is off, a link to Settings → Modules sits under the panel.
With the module on, the table has two more columns:
| Column | What it shows |
|---|---|
| Pooled demand (3 months) (Обединено търсене (3 мес.)) | The pooled quantity in packs, for example ”≈ 85 packs”, and “you 4 packs + 6 other clinics” |
| Supplier tier (Праг на доставчика) | The tier from your supplier’s price list and how far you get |
The Supplier tier (Праг на доставчика) column shows one of three:
- “{price}/pack from {qty} packs — you reach it alone” — your own quantity reaches the tier;
- “{price}/pack from {qty} packs — reachable with pooled demand” — only the pooled quantity reaches it; the list price is shown below;
- “next tier: from {qty} packs → {price}/pack” — the pooled quantity doesn’t reach it yet.
What is shared:
- Only an anonymous number of packs per item, and only with the clinics that also switched the module on. Clinic names and counts are never shared.
- The total covers the three full calendar months before this one. Other clinics’ quantities are rounded to 5 packs.
- The pooled quantity shows only when at least 2 other clinics use the item. Otherwise you see “Shown once at least 2 other clinics use this item.”
- Your prices and catalogues are not shared.
DentaFlow does not order or negotiate for you — the tiers come from your supplier’s price list. What you do with the pooled quantity is up to you and your supplier.
Frequently asked questions
Which files can I import? CSV, XLSX and XLS up to 10 MB. From an Excel file the first sheet is read. With the AI price list import (PDF) module, also a PDF up to 8 MB.
Where does the PDF go? To Anthropic (US), only to read its rows. CSV and Excel files never leave your browser. Without the module switched on, a PDF isn’t accepted.
Why weren’t some rows imported? Because they’re missing a name or a price, or their price, units per pack, VAT rate or SKU is invalid or repeated. After importing, the “Skipped rows” (Пропуснати редове) list shows each row’s number and the reason.
My price list uses commas for decimals. Will it be read correctly? Yes. “35,50”, “1.234,50” and “1 234,50 €” are read as 35.50 and 1234.50. A row with text instead of a price, such as “по запитване” (on request), is skipped.
My price list is in leva. Can I import it? Yes. On the Columns step check the “Currency of the prices in the file” block and choose Leva (BGN) if it wasn’t detected. DentaFlow converts the prices to euro at the fixed rate 1 € = 1.95583 BGN and rounds to the cent. If you leave Euro (EUR) for a list in leva, the numbers are saved as euro.
Why does the comparison show a different price from the price list? The comparison ranks by price per stock unit — the pack price divided by the units per pack. A box of 100 gloves at €5.40 is cheaper per glove than a box of 10 at €1.00, even though its pack price is higher.
Can other clinics see my catalogues and prices? No. Catalogues, prices and material consumption belong to your clinic only. If you switch on Pooled demand for supplies, only an anonymous number of packs per item goes into the pooled quantity — no clinic name, no prices.
Does DentaFlow order together with other clinics? No. Pooled demand only shows the total quantity and which supplier tier it reaches. You place your own orders with your own suppliers.
Why don’t I see the Material consumption panel? Because no materials were written off in the last 90 days — neither by hand nor with procedures. The panel only shows when there’s real data.